Stehr Plate Compactor Road
The Stehr Plate Compactor is a versatile tool able to cope with difficult ground conditions, yet provide consistent results.
The Plate Compactor can be mounted on various carriers, including wheeled loaders, rollers, excavators, Unimogs, tractors, graders and railway machinery.
With Stehr, there’s no need to make repetitive (and expensive) passes over the material. Thanks to its combined roller and plate configuration, it puts several complex steps together into one machine and does them all in one single run.
Advantages
- A completely vertical compaction line using two counteraction eccentric shafts, this means that the force is applied 100 % vertically into the ground
- The roller operates at low frequency and high amplitude (30 Hz), while the plate compactors work at high frequency (60Hz) and low amplitude
| Type | SBV 55 H2 | SBV 55 H3 | SBV 55 H3 | SBV 55 H1S | SBV 55 H4 |
|---|---|---|---|---|---|
| Weight (kg) | 820 | 1.315 | 1.235 | 685 | 1.890 |
| Width (mm) | 1.725 | 2.600 | 2.120 | 850 | 3.000 |
| Hydraulic motor | Coq wheel | Coq wheel | Coq wheel | Coq wheel | Coq wheel |
| Absorption Capacity (ccm) | 2 x 19 | 3 x 19 | 3 x 19 | 1 x 14 | 4 x 14 |
| Pump delivery rate (l/min) | 67 | 67 | 67 | 49 | 2 x 49 |
| min. Operating pressure (bar) | 180 | 180 | 180 | 180 | 210 |
| Laterally adjustable R/L (mm) | - | 700 | 700 | 900 | - |
| Frequency (Hz) | 40 - 60 | 40 - 60 | 40 - 60 | 40 - 60 | 40 - 60 |
| Amplitude (mm) | 2, 12 | 2, 12 | 2, 12 | 2, 12 | 2, 12 |
| Zentrifugalkraft (kN) | 2 x 60 | 3 x 60 | 3 x 60 | 1 x 60 | 4 x 60 |
